B01-04B1008A - British Std SIMPLEX (Steel) SPROCKET 04B-1 (6mm Pitch x 2.8mm x 9.80mm Dia.Boss One Side x 10.0mm T.B Length x 5.0mm Pilot Bore) - 8 teeth

B01-04B1008A - British Std SIMPLEX (Steel) SPROCKET 04B-1 (6mm Pitch x 2.8mm x 9.80mm Dia.Boss One Side x 10.0mm T.B Length x 5.0mm Pilot Bore) - 8 teeth This Extensive Stock Range of Sprockets are to suit Roller Chains that conform to BS228, Din 8187 and the ISO 606R Standards. The dimensions are too the Metric European series which have been commonly adopted throughout Europe and are in Carbon Steel. The Tooth range can be extended further by utilizing the larger Stock Range of Plate wheels, although these do not have a boss, they can be supplied with a weld on a boss if required.



With further Sizes and alternative design types being provided through the company's own UK Manufacturing Service enabling it to provide a one stop service regardless of whether you require a one-off special, a prototype or small volume repeat business, it can even cater for large volume repeat business from its competitive European manufacturing partners in Italy.



Looking for a None Stock Tooth Size?




Then check to see if it is listed as a Plate wheel as any plate wheel can be supplied as a sprockets by Welding on a Boss.



Alternatively the company provides a Manufacturing Service for any none Standard tooth size not in the Standard tooth range.




Need Heavy Duty Castings?



Heavy Duty castings for applications where Impact loads are common or when increase strength is required, then please ask our Sales Department for details of our Heavy Duty Casting range in GG25 or our Casting Service when you require an Oversize Boss or you have a Special Pattern requirement such as a Shear Pin or Split Designs.



As a rough guide we would recommend that any boss diameter should be at least 1.5 times the shaft diameter it is required to fit onto.