Your guided selection
Check this product’s specifications and choose any required options below. Add it to your basket to continue your journey.
← Back to your product guide
B02-06B2060A - British Std DUPLEX (Steel) SPROCKET 06B-2 (3/8" Pitch x 7/32" x 88.0mm Dia. Boss One Side x 50.0mm T.B Length x 20.0mm Pilot Bore) - 60 teeth
£30.00
In stock
SKU
B02-06B2060A
B02-06B2060A - British Std DUPLEX (Steel) SPROCKET 06B-2 (3/8" Pitch x 7/32" x 88.0mm Dia. Boss One Side x 50.0mm T.B Length x 20.0mm Pilot Bore) - 60 teeth
B02-06B2060A - British Std DUPLEX (Steel) SPROCKET 06B-2 (3/8" Pitch x 7/32" x 88.0mm Dia. Boss One Side x 50.0mm T.B Length x 20.0mm Pilot Bore) - 60 teeth
For British Standard Roller Chains to BS 228-DIN 8187-ISO 606R
This Standard Range of Duplex Roller Chain Sprockets are to suit British Standard Roller Chain that conform to BS 228-Din 8187 and ISO 606R Standards. They are manufactured to the Metric European Standard having the Squared Tooth Profile and a Boss one side.
As this Standard has now been adopted throughout Europe they should be identical and interchangeable with most if not all of the other manufactured Brands offered within the European Union.
Steel Sprockets, 8-40 tooth upto 3/4" pitch, are produced in grade C45 and are suitable for Flame or Induction Hardening. Sizes outside of this range, depending on pitch and tooth size, can be either C45 or FE Steel.
Cast Iron Chainwheels : Grade GJL200 as standard, with increased Boss Diameter and Heavy Duty GG25 available upon request.
Need a Heavy Duty Castings?
Heavy Duty castings for applications where High Impact loads are common or when increase strength is required? then please ask our Sales Department for details of our Heavy Duty Casting range in GG25 or our Casting Service when you require an Oversize Boss or you have a Special Pattern requirement such as a Shear Pin or Split Designs.
As a rough guide we would recommend that any boss diameter should be at least 1.5 times the shaft diameter it is required to fit onto.
This Standard Range of Duplex Roller Chain Sprockets are to suit British Standard Roller Chain that conform to BS 228-Din 8187 and ISO 606R Standards. They are manufactured to the Metric European Standard having the Squared Tooth Profile and a Boss one side.
As this Standard has now been adopted throughout Europe they should be identical and interchangeable with most if not all of the other manufactured Brands offered within the European Union.
Steel Sprockets, 8-40 tooth upto 3/4" pitch, are produced in grade C45 and are suitable for Flame or Induction Hardening. Sizes outside of this range, depending on pitch and tooth size, can be either C45 or FE Steel.
Cast Iron Chainwheels : Grade GJL200 as standard, with increased Boss Diameter and Heavy Duty GG25 available upon request.
Need a Heavy Duty Castings?
Heavy Duty castings for applications where High Impact loads are common or when increase strength is required? then please ask our Sales Department for details of our Heavy Duty Casting range in GG25 or our Casting Service when you require an Oversize Boss or you have a Special Pattern requirement such as a Shear Pin or Split Designs.
As a rough guide we would recommend that any boss diameter should be at least 1.5 times the shaft diameter it is required to fit onto.
| Product Family | Drive Sprockets (with Boss) |
|---|---|
| Chain Standard | British Standard |
| Plex | Duplex |
| Pitch | 3/8" (9.525 mm) |
| Number of Teeth | 60 |
| Bore Type | Pilot Bore |
| Bore Diameter | 20 mm |
| Material | Steel |
| Component Type | Sprocket |
| Chain Reference | 06B-2 |
| Internal Chain Width | 5.55625 mm |
| Boss Diameter | 88 mm |
| Through-bore Length | 50 mm |
Write Your Own Review