Your guided selection
Check this product’s specifications and choose any required options below. Add it to your basket to continue your journey.
← Back to your product guide
B07-10B1T048A08 - British Std. SIMPLEX (Steel) Sprocket TAPERBORED (NORMAL Fit - Boss Side) 10B-1 (5/8" Pitch x 3/8") x 48 teeth for 2012 Bush
£58.12
Out of stock
SKU
B07-10B1T048A08
Enquire About This Product
B07-10B1T048A08 - British Std. SIMPLEX (Steel) Sprocket TAPERBORED (NORMAL Fit - Boss Side) 10B-1 (5/8" Pitch x 3/8") x 48 teeth for 2012 Bush — B07-10B1T048A08
B07-10B1T048A08 - British Std. SIMPLEX (Steel) Sprocket TAPERBORED (NORMAL Fit - Boss Side) 10B-1 (5/8" Pitch x 3/8") x 48 teeth for 2012 Bush
B07-10B1T048A08 - British Std. SIMPLEX (Steel) Sprocket TAPERBORED (NORMAL Fit - Boss Side) 10B-1 (5/8" Pitch x 3/8") x 48 teeth for 2012 Bush
Our range of Taper Bored Sprockets has been extended far beyond any of our competitor's ranges of 3/8" to 2" pitch.
As well as now including:
Even Tooth sizes up to 40 teeth, & in between tooth sizes up to and including 114 tooth both in Cast Iron & Steel (including sizes not available elsewhere).
Larger Pitch Sizes up to & including 2".
Some with alternative Bush Sizes.
To Compliment this range, the company also provides two other alternative ranges:
Reverse Taper Bushed (Bush fits in from the teeth side).
Simplex Taper Bushed with Induction Harden teeth.
Beside the Simplex Induction Harden range, the company also offer a Flame or Induction Hardening Service to any STEEL sprocket listed.
As well as now including:
Even Tooth sizes up to 40 teeth, & in between tooth sizes up to and including 114 tooth both in Cast Iron & Steel (including sizes not available elsewhere).
Larger Pitch Sizes up to & including 2".
Some with alternative Bush Sizes.
To Compliment this range, the company also provides two other alternative ranges:
Reverse Taper Bushed (Bush fits in from the teeth side).
Simplex Taper Bushed with Induction Harden teeth.
Beside the Simplex Induction Harden range, the company also offer a Flame or Induction Hardening Service to any STEEL sprocket listed.
| Product Family | Drive Sprockets (with Boss) |
|---|---|
| Chain Standard | British Standard |
| Plex | Simplex |
| Pitch | 5/8" (15.875 mm) |
| Number of Teeth | 48 |
| Bore Type | Taper Bored |
| Material | Steel |
| Component Type | Sprocket |
| Chain Reference | 10B-1 |
| Internal Chain Width | 9.525 mm |
| Taper Bush Reference | 2012 |
| Mounting Orientation | Normal |
Write Your Own Review