Your guided selection
Check this product’s specifications and choose any required options below. Add it to your basket to continue your journey.
← Back to your product guide
B08-20B2T030A14 - British Std. DUPLEX (Steel) Sprocket TAPERBORED (NORMAL Fit - Boss Side) 20B-2 (1.1/4" Pitch x 3/4") x 30 teeth for 3525 Bush
£300.63
Out of stock
SKU
B08-20B2T030A14
Enquire About This Product
B08-20B2T030A14 - British Std. DUPLEX (Steel) Sprocket TAPERBORED (NORMAL Fit - Boss Side) 20B-2 (1.1/4" Pitch x 3/4") x 30 teeth for 3525 Bush — B08-20B2T030A14
B08-20B2T030A14 - British Std. DUPLEX (Steel) Sprocket TAPERBORED (NORMAL Fit - Boss Side) 20B-2 (1.1/4" Pitch x 3/4") x 30 teeth for 3525 Bush
B08-20B2T030A14 - British Std. DUPLEX (Steel) Sprocket TAPERBORED (NORMAL Fit - Boss Side) 20B-2 (1.1/4" Pitch x 3/4") x 30 teeth for 3525 Bush
Our range of Taper Bored Sprockets has been extended far beyond any of our competitor's ranges of 3/8" to 2" pitch.
As well as now including:
Even Tooth sizes up to 40 teeth, & in between tooth sizes up to and including 114 tooth both in Cast Iron & Steel (including sizes not available elsewhere).
Larger Pitch Sizes up to & including 2".
Some with alternative Bush Sizes.
To Compliment this range, the company also provides two other alternative ranges:
Reverse Taper Bushed (Bush fits in from the teeth side).
Simplex Taper Bushed with Induction Harden teeth.
Beside the Simplex Induction Harden range, the company also offer a Flame or Induction Hardening Service to any STEEL sprocket listed.
As well as now including:
Even Tooth sizes up to 40 teeth, & in between tooth sizes up to and including 114 tooth both in Cast Iron & Steel (including sizes not available elsewhere).
Larger Pitch Sizes up to & including 2".
Some with alternative Bush Sizes.
To Compliment this range, the company also provides two other alternative ranges:
Reverse Taper Bushed (Bush fits in from the teeth side).
Simplex Taper Bushed with Induction Harden teeth.
Beside the Simplex Induction Harden range, the company also offer a Flame or Induction Hardening Service to any STEEL sprocket listed.
| Product Family | Drive Sprockets (with Boss) |
|---|---|
| Chain Standard | British Standard |
| Plex | Duplex |
| Pitch | 1 1/4" (31.75 mm) |
| Number of Teeth | 30 |
| Bore Type | Taper Bored |
| Material | Steel |
| Component Type | Sprocket |
| Chain Reference | 20B-2 |
| Internal Chain Width | 19.05 mm |
| Taper Bush Reference | 3525 |
| Mounting Orientation | Normal |
Write Your Own Review