Your guided selection
Check this product’s specifications and choose any required options below. Add it to your basket to continue your journey.
← Back to your product guide
B10-12B1R030A10 - British Std. SIMPLEX (Steel) Sprocket TAPERBORED (REVERSE Fit - Teeth Side) 12B-1 (3/4" Pitch x 7/16") x 30 teeth for 2517 Bush
£121.19
In stock
SKU
B10-12B1R030A10
B10-12B1R030A10 - British Std. SIMPLEX (Steel) Sprocket TAPERBORED (REVERSE Fit - Teeth Side) 12B-1 (3/4" Pitch x 7/16") x 30 teeth for 2517 Bush
B10-12B1R030A10 - British Std. SIMPLEX (Steel) Sprocket TAPERBORED (REVERSE Fit - Teeth Side) 12B-1 (3/4" Pitch x 7/16") x 30 teeth for 2517 Bush
For British Standard Roller Chains to BS228-DIN8187-ISO606R
The Standard Design format of Taper Bush Sprocket, is for the Bush to be fitted from the boss side, and for most applications this does not create any major problem.
However when the drive sprocket is required to fit directly onto a Motor or Gearbox that has only a limited shaft length or when access to the locking Screws is restricted to one side, then it can prove difficult to tighten the locking screws into place. Hence the need for the Bush to fit in from the Teeth side, commonly known as a Reverse Taper Bored Sprocket.
The company now produces a Standard Stock Range of Reverse Taper Bored Sprockets which has been developed through its experience of Servicing its Customers over many years. Although this range now covers a number of Tooth and Pitch sizes, it is not endless. Therefore if you can not find the Tooth or Pitch size you are looking for here, then please do contact the Sales Department, as they can be produced upon request on short lead times.
The Standard Design format of Taper Bush Sprocket, is for the Bush to be fitted from the boss side, and for most applications this does not create any major problem.
However when the drive sprocket is required to fit directly onto a Motor or Gearbox that has only a limited shaft length or when access to the locking Screws is restricted to one side, then it can prove difficult to tighten the locking screws into place. Hence the need for the Bush to fit in from the Teeth side, commonly known as a Reverse Taper Bored Sprocket.
The company now produces a Standard Stock Range of Reverse Taper Bored Sprockets which has been developed through its experience of Servicing its Customers over many years. Although this range now covers a number of Tooth and Pitch sizes, it is not endless. Therefore if you can not find the Tooth or Pitch size you are looking for here, then please do contact the Sales Department, as they can be produced upon request on short lead times.
| Product Family | Drive Sprockets (with Boss) |
|---|---|
| Chain Standard | British Standard |
| Plex | Simplex |
| Pitch | 3/4" (19.05 mm) |
| Number of Teeth | 30 |
| Bore Type | Taper Bored |
| Material | Steel |
| Component Type | Sprocket |
| Chain Reference | 12B-1 |
| Internal Chain Width | 11.1125 mm |
| Taper Bush Reference | 2517 |
| Mounting Orientation | Reverse |
Write Your Own Review