Your guided selection
Check this product’s specifications and choose any required options below. Add it to your basket to continue your journey.
← Back to your product guide
B11-16B1T017IN50/55 - British Std. SIMPLEX (Steel) Sprocket TAPERBORED 16B-1 (1" Pitch x 17.02mm) x 17 tooth with Induction Harden Teeth to 50/55 HRC for 2012 Bush
Price on enquiry
Out of stock
SKU
B11-16B1T017IN50/55
Enquire About This Product
B11-16B1T017IN50/55 - British Std. SIMPLEX (Steel) Sprocket TAPERBORED 16B-1 (1" Pitch x 17.02mm) x 17 tooth with Induction Harden Teeth to 50/55 HRC for 2012 Bush — B11-16B1T017IN50/55
B11-16B1T017IN50/55 - British Std. SIMPLEX (Steel) Sprocket TAPERBORED 16B-1 (1" Pitch x 17.02mm) x 17 tooth with Induction Harden Teeth to 50/55 HRC for 2012 Bush
B11-16B1T017IN50/55 - British Std. SIMPLEX (Steel) Sprocket TAPERBORED 16B-1 (1" Pitch x 17.02mm) x 17 tooth with Induction Harden Teeth to 50/55 HRC for 2012 Bush
This range of Shaft Ready Simplex Sprockets was originally developed from the experience gained servicing the demand for Finished Machined sprockets for the replacement market. However since its introduction, this range has proved so popular that the company has been able to increase its production volumes, and in turn enabled it to reduce its unit cost to make it a very competitive alternative to reworking a pilot bore sprocket for the small to large volume OEM user.
| Product Family | Drive Sprockets (with Boss) |
|---|---|
| Chain Standard | British Standard |
| Plex | Simplex |
| Pitch | 1" (25.4 mm) |
| Number of Teeth | 17 |
| Bore Type | Taper Bored |
| Material | Steel |
| Component Type | Sprocket |
| Chain Reference | 16B-1 |
| Taper Bush Reference | 2012 |
| Tooth Hardening | Induction Hardened |
Write Your Own Review