C02-160H2R-011 - ANSI Duplex HEAVY(H) Series - CONNECTING LINK - Split Pin Type for ASA160H-2 (2" pitch x 1.1/4") to Din 8188

C02-160H2R-011 - ANSI Duplex HEAVY(H) Series - CONNECTING LINK - Split Pin Type for ASA160H-2 (2" pitch x 1.1/4") to Din 8188 American Standard Roller Chains Heavy (H) Series based on ISO 606R /Din 8188



H Series Roller Chains are based on the Standard Series Chains, although normally supplied and produced as a riveted chain, they can also be supplied as a cottered type if required.



The only difference from the standard series is the increase in plate thickness, for example a ASA 60H chain would have the same plate thickness of ASA80, by increasing the plate thickness it improves the capacity to absorb shock loads by 10%. Beside increasing the side plate thickness, other Production Technics can be introduced to provide chains capable of up to 30% Higher for Heavy Duty applications in the Earth Moving & Quarrying Industries.



Production Measures that can be included to provide Chains that are more suitable for High Impact Loads :-




Through Hardened Pins



Shaped Side Plates



Interference Fit Between Pins & Outer Plates




Precision Roller Chains: as the company offer a combined range, that is produced by a number manufacturers from around the World, they have adopted the following Quality Standards :-




All chains have been produced in plant that is Certified to ISO 9001.



Chains covered by the ISO 606R Standard, will conform to this Standard of Specification and Quality.



For chains not covered by ISO606R, then we have adopted the appropriate Din 8187 or Din 8188 or Ansi B 29.1 of Specification and Quality Standard.



Work standard chains not covered by the above standards will conform to the appropriate Manufacturer's Standard.

Matched WP base product: ANSI. B29.1 H Series Roller Chains & High Impact Load Versions