Check this product’s specifications and choose any required options below. Add it to your basket to continue your journey.
← Back to your product guide
C24-N06B2 - British Std. DUPLEX Nickel Plated Roller Chain Ref: 06B-2 (3/8" pitch x 7/32") SATI BRAND to Din 8187 with Solid Rollers & Pre-Stretched to Reduce Elongation
How do I choose a chain length?
Lakehurst holds roller chain stock in pitches and may offer specific lengths or boxes as Encore selling options.
Why it matters
The supply option, number of separate lengths and end arrangement affect the quotation.
How to identify it
- Specify the required pitch count or exact named length option, plus the number of separate pieces.
- For a cut length, describe the required ends and any joining arrangement; include a drawing or photograph if unsure.
- For example, Lakehurst has confirmed that a cut of 117 pitches with both ends on inners uses an extra pitch when cut, so that example is priced with 118 pitches.
- Check the quoted supply unit, allowance and any separate links before ordering.
Units
State pitches, metres, feet or the named Encore option explicitly. Quantity of pieces is separate from length per piece.
Common mistakes
Do not assume all cuts need one extra pitch, that a box price is a per-pitch price, or that metres and feet share the same price multiplier.
Not sure?
Use the enquiry form to describe the length and ends required. Lakehurst can confirm the selling option and cutting allowance.
Enquire About This Product
C24-N06B2 - British Std. DUPLEX Nickel Plated Roller Chain Ref: 06B-2 (3/8" pitch x 7/32") SATI BRAND to Din 8187 with Solid Rollers & Pre-Stretched to Reduce Elongation — C24-N06B2
Available chain options: Pitch, 10 Foot, 5 Meters, 1 Meter, 19Pitches. Tell us the option and quantity you need in your message.
For cut lengths, tell us the required pitch count and end arrangement. A cut requiring one additional pitch will be quoted with that allowance.
Listed here is the B.S.Short Pitch Series of Roller Chains that conform to ISO 606r/Din 8187 from one particular manufacturer that can be supplied Nickel Plated. The Plating process having been applied prior too assembly to ensure maximum protection of all the component parts.Beside these chains and this manufacturer, the company have a number of others that offer a Plating Service for most of there production ranges although they may be subject to a minimum production quality.
Therefore if you are looking for a Nickel Plated Chain other than what is listed here, please contact the Sales Department with your requirement.
Precision Roller Chains: as the company offer a combined range, that is produced by a number manufacturers from Europe and Japan, they have adopted the following Quality Standards :-
All chains have been produced in plant that is Certified to ISO9001.
Chains covered by the ISO606R Standard, will conform to this Standard of Specification and Quality.
For chains not covered by ISO606R, then we have adopted the appropriate Din 8187 or Din 8188 or Ansi B 29.1 of Specification and Quality Standard.
Work standard chains not covered by the above standards will conform to the appropriate Manufacturer's Standard.
Matched WP base product: British Standard Nickel Plated Carbon Steel Roller Chains
| Product Family | Roller Chains |
|---|---|
| Chain Standard | British Standard |
| Plex | Duplex |
| Pitch | 3/8" (9.525 mm) |
| Coating | Nickel Plated |
| Component Type | Chain |
| Product Range | British Standard Nickel Plated Carbon Steel Roller Chains |
| Chain Reference | 06B-2 |
| Internal Chain Width | 5.55625 mm |
| Brand | SATI |